2-Channel 4K HDR HDMI over Extended Reach HDBaseT Input Card with Analog Audio

Model: DTAxrC2-IN2-F34

Max. Data Rate — 18Gbps (6Gbps per graphics channel), 10Gbps CSC over CAT cable.
Max. Resolution — 4K@60Hz (4:4:4).
Analog Audio Embedding/De–embedding or ARC — On the same jack.
HDBaseT Technology — HDTV compatible, HDCP 2.2/1.4 compliant.
System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

DTAxrC2?IN2?F34 is a 2?channel, 4K@60Hz (4:4:4), CSC, HDMI, analog audio, bidirectional RS?232, Ethernet, & IR over HDBaseT twisted pair receiver card for compatible Kramer Modular Multi?Format Digital Matrix Switchers. DTAxrC2?IN2?F34 inputs two extended?reach HDBaseT signals with selectable embedded/de–embedded analog audio, bidirectional RS?232, Ethernet, and IR from the line to the chassis.

Max. Data Rate — 18Gbps (6Gbps per graphics channel), 10Gbps CSC over CAT cable.
Max. Resolution — 4K@60Hz (4:4:4).
Analog Audio Embedding/De–embedding or ARC — On the same jack.
HDBaseT Technology — HDTV compatible, HDCP 2.2/1.4 compliant.
System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.
Ethernet Extension — Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
Bidirectional RS–232 Extension — Serial interface data flows in both directions, allowing data transmission and device control.
Bidirectional Infrared Extension — IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
3D Pass–Through.
PoE (Power over Ethernet) Enabled — Provides PoE power to a connected device with the Kramer PoE Power Supply Add–On PS–4812 (sold separately).

Depth: 9.80 in
Height: 0.79 in
Storage Temperature: –40° to +70°C (–40° to 158°F)
Video:
•Max Data Rate: Up to 18Gbps (6Gbps per graphic channel), 10Gbps CSC over CAT cable
•Standard Compression Max Resolution: 4096x2160@60Hz (4:4:4) 24bpp
•High Compression Max Resolution: 3840x2160@60Hz (4:4:4) 24bpp
•No-Compression Max Resolution: 4096x2160@60Hz (4:2:0) 24bpp
•Compliance: HDCP 2.2, HDR 10
•HDMI Support: Deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0
Width: 9.84 in
Shipping Weight: 1.10 lbs
Ports:
•2 Unbalanced Audio: On a 6–pin terminal block connector
•2 RS-232: On a 6–pin terminal block connector
•2 IR: On a 4–pin terminal block
•1 Ethernet: On an RJ–45 connector
Inputs: 2 HDBaseT: On RJ–45 connectors
Humidity: 10% to 90%, RHL non–condensing
Product Weight: 0.66 lbs
Active Power: 21.50 Watt
Sustainability Rating: WEEE
Certifications: CE
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Shipping Width (with packaging): 6.50 in
Shipping Height (with packaging): 2.32 in
Shipping Depth (with packaging): 13.58 in
Extended RS-232: Baud Rate: 300 to 115200
Extended Ethernet: Bandwidth: Up to 100Mbps
EXTENSION LINE:
•Standard Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), 4K@60Hz (4:2:0) or 4K@30Hz (4:4:4)
•Up to 180m (590ft) at full HD (1080p @60Hz 24bpp)
•High Compression: Up to 100m (330ft) at 4K@60Hz (4:4:4), or 4K@60Hz (4:2:0)
•Up to 180m (590ft) at 4K@30Hz (4:4:4)
•Up to 200m (650ft) at full HD (1080p @60Hz 24bpp)
•No Compression: Up to 100m (330ft) at 4K@60Hz (4:2:0)
•Up to 180m (590ft) at full HD (1080p @60Hz 24bpp)
•Standards Compliance: HDBaseT 1.0

Input/Output Board/Card Type - Audio
ROHS Compliant - Yes

PS-4812 - PoE Power Supply Add–On for VS–34FD

TP-583T - 4K HDR HDMI Transmitter with RS-232 and IR over Long-reach HDBaseT

TP-583TXR - 4K HDR HDMI Transmitter with RS-232 and IR over Extended-reach HDBaseT

VS-34FD - 8K-Ready 34-Port Multi-Format Digital Matrix Switcher with Interchangeable I/Os

WP-20 - Ultra-HD HDBaseT Active Wallplate Auto Switcher

WP-211T - 4K60 4:2:0 HDCP 2.2 HDMI Wall Plate Auto Switcher and PoE Acceptor over HDBaseT

WP-789T/US-D(W/B) - 4K60 4:2:0 HDMI 1–Gang PoE Wall–Plate Transmitter with RS–232 and IR over Long–Reach HDBaseT

Input Card 112651 kb - Data Sheet

Project List

Request Quote

AV-iQ Terms and Conditions | | Powered by AV-iQ

New Products

2-Channel 4K HDR HDMI over Extended Reach HDBaseT Input Card with Analog Audio

Model: DTAxrC2-IN2-F34